CATEGORY
◉ Profile Grinder
► CNC Multi-Purpose Punch Grinder
► CNC Multi-Purpose Profile Grinder
► Endface Multifunction Grinding Machine
◉ Cutting Machine
► Double Servo Automatic Carbide Bar Cut Off Machine
► CNC Automatic Cutting Machine for Carbide Bar
► Semi-Manual Cut Off Machine For Tungsten Carbide Bar
◉ Chamfering Machine
► CNC Tungsten Carbide Bar Chamfering Machine
► Auto Ferris Wheel Chamfering Machine For Tiny Tool
◉ Multi Purpose
► Smart Rod Cutting & Chamfering Machine
► Automatic Biaxial Weldon Flat & Cutting Machine
◉ Cutting Machine for Aluminum
► Semi-Automatic Cutting Machine For Aluminum Sheet
For Multi-Pad Lifters
VL-2-30B
VL-2-80B
VL-2-150
VL-4-200
VL-8-300
Do not need to rely on external power, outward control or any complex ccessories. The machine create its’ own vacuum function which is used for factory, warehouse as well as anything need to be lifted, moved, storage indoor or outdoor.
● Increase Productivity
● High safety for user
● Elminates Equipment Damage
● Elminates Material Damage
● Improve Storage Utilization
● Simple On/Off Cycle is Quick and Reliable Upward/Downward Movement Controls Vacuum Pickup and Release
Model No. | Capacity(kg) | No. of pads | OD of pads(mm) | Beam Length(mm) | Net Weight(kg) |
---|---|---|---|---|---|
VL-8-300 | 3000 | 8 | 480 | 6000 | 1000 |
VL-4-200 | 2000 | 4 | 480 | 6000 | 670 |
VL-2-150 | 1500 | 2 | 480 | 2000 | 200 |
VL-2-80B | 1000 | 2 | 480 | 2000 | 200 |
VL-2-30B | 300 | 2 | 350 | 2000 | 70 |
● Use crane to hook the vacuum tank. (Main body of vacuum lifter)
● Please confirm the position of vacuum lifter. The vacuum pad should right on the top of the plate and cover
● plate. Then control of the crane machine to let chain goes down to the Main body of vacuum lifter position.
● (Chain slack).
● Control the crane machine to lift up the chain, and confirm if the plate be sucked.
● Lift up the crane let the vacuum lifter to lift up the plate a little bit to check the sucking condition.
● When arrive the right position, and confirm the position of the plate you are going to put down move down to slack the crane's chain.
● Pull up the chain once again to let the vacuum lifter to release the plate.
● Let vacuum lifter goes down to loose the chain till to suck next plate.
● Handle from the thickness portion OR center of metal plate.
● Look across to the 2 inch deflection column.
● Confirm the Max and Min. size of plate.
● Check the distance of pads if as the suggestion, the same principle apply to all vacuum lifter.