Vacuum Chuck
The chuck apply for milling machine or grinding machine to process the surface and side.
Applied for light metal, hard metal, plastics, ceramics, glass, aluminum alloy, stainless steel... etc none None-nagnetic and no ventilated plane.
．Change the chuk's size depend on the workpiece's size.
．No need air pump, just connect the air compressor then start the operation.
．Amy workpiece can be done very well.
Parallel angle: ±0.01
Material: S45C
Product: dye black up/down grinding
Plate: hot handling
Fitting: Silicone strip Ø4*10M
| Model | A | B | C | D | Weight | Suction |
|---|---|---|---|---|---|---|
| W | L | H | Total | (kg) | ||
| VLC-1515 | 150 | 150 | 60 | 180 | 4 | 135 |
| VLC-1530 | 150 | 300 | 60 | 330 | 16 | 270 |
| VLC-3030 | 310 | 310 | 100 | 330 | 45 | 540 |
| VLC-3045 | 300 | 450 | 105 | 480 | 56 | 810 |
| VLC-3060 | 300 | 600 | 100 | 630 | 69 | 1080 |
| VLC-2020 | 200 | 200 | 60 | 230 | 15 | 240 |
| VLC-2040 | 200 | 400 | 100 | 430 | 35 | 480 |
| VLC-4040 | 400 | 400 | 100 | 430 | 52 | 960 |
| VLC-4060 | 400 | 600 | 100 | 630 | 77 | 1440 |
| VLC-4080 | 400 | 800 | 100 | 830 | 118 | 1920 |
| VLC-40100 | 400 | 1000 | 100 | 1030 | 130 | 2400 |
| VLC-2525 | 250 | 250 | 100 | 280 | 20 | 375 |
| VLC-2550 | 250 | 500 | 100 | 530 | 44 | 750 |
| VLC-5050 | 500 | 500 | 100 | 530 | 78 | 1500 |
| VLC-5075 | 500 | 750 | 100 | 780 | 95 | 2250 |
| VLC-50100 | 500 | 1000 | 100 | 1030 | 165 | 3000 |
| VLC-50125 | 500 | 1250 | 100 | 1280 | 178 | 3750 |
| VLC-6060 | 600 | 600 | 100 | 630 | 110 | 2160 |
| VLC-6090 | 600 | 900 | 100 | 930 | 140 | 3240 |
|
※ Notice |
||||||
Use semi-automatic milling machine to process.
1. Let the center hole as center to use the parts (white silicon) to make a circle of vacuum chunk. The start point and end point should be seal.
2. The work piece should over the area of the white silicon then it can have the vacuum to suck the work piece.
3. Please use the vacuum chunk according above description.
